The dust layer settles on every panel
Glass on buildings faces hard conditions: fine dust that builds up on external facades, summer heat that bakes marks into the surface, and salt in the air in some districts that leaves white residue on panels. Large, high-level glazing adds another layer of difficulty, because reaching it safely requires preparation before anyone touches a squeegee.
Call or message us on WhatsApp and tell us the building location and district, a description of the facade and its rough height, and what you notice on the glass. We agree a time with you and tell you what to prepare before the visit, and we take care of the rest.
- Glass facades
- High-level panels
- Frames and joints
What does building glass cleaning cover?
These are the parts and stages the work covers in building glass cleaning, depending on the type of facade, its condition and its height.
- External glass panels
The panels are cleaned of accumulated dust, marks and the white residue left by rain water and wind-carried salts, the layer most exposed to the weather.
- Internal glass panels
The inner face collects fingerprints, contact marks and light dust, and is cleaned in a way that suits that surface without disrupting people inside.
- Frames and joints
Dust settles into the joints between panels and around metal frames, and cleaning them is part of the job because what builds up there migrates back onto the glass.
- High-level surfaces
Glass on upper floors requires access planning, and this is discussed when the time is agreed, because the height and building design both affect how the work is done.
- Water and salt deposits
Water and wind leave mineral deposits that appear white or hazy and behave differently from ordinary dust when removed, so they are treated separately where needed.
- Check after finishing
After finishing, natural light is used to spot any missed mark or streak before leaving, because large glass reveals overlooked areas clearly in good light.
How do we start?
Three simple steps, and we take care of the rest.
Call or message us on WhatsApp
Tell us the service you need and your district.
Tell us about the building
Tell us your district and the building location, a description of the glazed facade and its rough height, and what you notice on the glass, whether dust, deposits or marks.
We agree a time and what to prepare
We settle on a suitable time and tell you what access you need to arrange, whether that is access to the facade or clearing a path in front of the building.
We clean and check the glass
We clean the panels inside and out, the frames and joints, then check the glass in natural light. After we finish, look at it from an angle to catch any mark we should revisit.
A service that comes to your door
- We come to youOur team arrives at your home with its equipment.
- One callCall or message us on WhatsApp and we arrange the rest.
- Glass and its surroundings with one teamWe clean shop glass, window exteriors, aluminium windows and tower glass, and we also polish tiles and marble.
- Describe the facade in your own wordsA call or a WhatsApp message is enough to describe the facade and tell us what you see on it.
One worry is that the glass might be scratched or damaged during cleaning. Large glazing is sensitive if the wrong tools or too much pressure are used on it. That is why we discuss the type and condition of the glass with you before starting, so leave the details to us.
Photos of our work
What our customers say
تجربته ممتازه والله يعطيكم العافيه
الله يعطيهم العافيه شغل محترف و نظيف و يعطونك نصايح تفيدك من خلال خبرتهم انصح بتجربتهم ماراح تندمون
جودة عمل بسعر معقول ماشاءالله الله يوفقكم
Questions about Building glass cleaning
How do I know my building glass needs specialist cleaning?
A fixed dust layer the wind does not shift, white powdery spots left by evaporated rain drops, or general haziness on the panel surface are signs of deposits a plain wipe will not remove. High-level glazing increases the need for specialist cleaning because reaching it yourself is not safe.
The glass is very high up, how is it reached?
Access depends on the building's design and the space around it. When you call, tell us the rough height, a description of the facade and whether there is a clear path in front, and we agree on the method and what you need to prepare.
What changes the scope of building glass cleaning?
Height, number of panels, glass type and condition are the main factors. Glass with mineral deposits needs additional treatment, and whether the work covers one side or both also matters. We discuss all of this when you call.
What should I prepare before the building glass cleaning appointment?
Give the team clear access to the facade and move any vehicles blocking the front of the building. If the inside is also being cleaned, arrange access to the relevant floors and move furniture and curtains away from the glass areas.
Can streaks appear on building glass after cleaning and how are they avoided?
Streaks usually appear when cleaning is done in intense heat because the solution dries before it is wiped, or when work starts without first removing the dry dust layer. Cleaning when direct sun is not on the glass reduces this, which we factor in when agreeing the time.
Related services
Have a look at services close to this one.
