Aluminium does not rust, but grease wears it down
Aluminium is a common choice kitchens because it handles heat and humidity, but it carries a thin oxide layer on its surface that gives it its sheen. When cooking grease, steam and the fine dust that comes in from outside build up together, that layer turns into a dull film that looks impossible to clean. Scrubbing it with abrasive materials scratches the surface and makes dirt stick more easily next time.
We start by hearing what you notice about your aluminium kitchen, then we work through the doors, frames, hinges, interior surfaces and storage shelves. Call or WhatsApp us, tell us your district and the size of the kitchen, and we agree a time with you.
- Doors and frames
- Interior surfaces
- Hinges and handles
What does aluminium kitchen cleaning cover?
These are the parts the cleaning covers in an aluminium kitchen, depending on its condition and what you notice in it.
- Aluminium doors and frames
Grease and fingerprints are removed from both faces of each door and from the surrounding frame, as these are the most affected areas from daily handling and proximity to heat.
- Hinges and handles
Grease builds up around hinges and stiffens them over time. We remove it from their gaps and recesses, because leaving it there affects how the door moves.
- Interior cabinet surfaces
Inside the cabinets, the fine dust mixes with moisture traces. We wipe the interior surfaces in a way that suits the aluminium without marking its finish.
- Storage shelves
Shelves carry marks from containers and liquid spills. We empty them with the homeowner, clean the surface fully and dry it before anything goes back.
- Aluminium edges and dividers
The edges and dividers between units trap grease in tight spaces that ordinary wiping cannot reach. We clean them with whatever suits those narrow areas.
- External kitchen facade
The side of the kitchen facing the room gathers fingerprints and steam marks. We wipe it so the natural sheen of the aluminium comes back clearly.
How do we start?
Three simple steps, and we take care of the rest.
Call or message us on WhatsApp
Tell us the service you need and your district.
Tell us about your kitchen
Tell us what you notice: whether the grease is old, whether the finish looks dull, whether any cabinets need particular attention, and which district you are in.
We agree a time and you prepare
We settle on a time that suits you, and you empty the shelves inside any cabinets that need interior cleaning and clear small appliances off the surfaces.
We work and you check
We clean the doors, frames, hinges and interior surfaces, then you check the edges and hinges and confirm that the doors open and close smoothly.
A service that comes to your door
- We come to youOur team arrives at your home with its equipment.
- One callCall or message us on WhatsApp and we arrange the rest.
- The rest of your kitchen with the same teamWe also clean ovens, kitchen marble, wooden kitchens and home appliances such as fridges and washers.
- Just describe what you seeCall or send a WhatsApp message, describe what you notice in your kitchen, and we agree on the rest.
One worry is that the wrong cleaning will scratch the aluminium or dull its finish for good. Aluminium is damaged by abrasive materials and strong acids, so the work starts by identifying the type of surface and its condition, and then we take care of the rest.
Photos of our work
What our customers say
ممتازين مره مره مره ومؤدبين
ما شاء الله على شغلهم ودقه في المواعيد
١٠/١٠ ما شاء الله
Questions about Aluminium kitchen cleaning
How do I know my aluminium kitchen needs specialist cleaning?
If the doors look dull and do not come back to their sheen after ordinary wiping, grease has built up around the hinges and they move stiffly, or yellow and dark marks appear that water and soap cannot shift, those are signs that the dirt has gone beyond the surface and needs a different approach.
Does cleaning aluminium with vinegar or lemon harm it?
Yes, aluminium reacts with acids, even mild ones like vinegar and lemon, and the surface slowly corrodes and loses its sheen over time. Many people try these materials and then notice the dullness gets worse instead of better, which is exactly why knowing the nature of the surface is a necessary step before starting.
What should I prepare before you come to clean the aluminium kitchen?
Empty the shelves inside any cabinets that need interior cleaning, move small appliances and utensils off the surfaces, and if there are upper cabinets at a significant height, mention that when you call so we can prepare to reach them.
Why does grease collect in the edges more than on open surfaces?
Open surfaces get air movement and are wiped daily, but edges, dividers and hinges are tight spaces that ordinary wiping does not reach. Cooking steam carries grease particles that settle in these recesses layer by layer until they harden and darken.
What should I check after the aluminium kitchen cleaning is done?
Open and close every door to check that the hinges move smoothly. Look along the edges and corners to confirm no grease residue remains. Check the surfaces at a side angle in the light to see how much of the sheen has come back, and let us know if you spot any area that needs another look.
Related services
Have a look at services close to this one.
